Use Bridgeport PVC jacketed MC and TECK cable connectors to connect jacketed MC (parking deck/lot cable) or TECK cable to an electrical box or enclosure. These connectors provide a rain-tight connection for trouble-free use in wet environments.
Barrel-Type Dual Connector, 1/2″, PVC for NM-B Cables
https://dev.nsiindustries.com/product/barrel-type-dual-connector-1-2-pvc-for-nm-b-cables/
The Bridgeport 1/2″ PVC Barrel-Type Dual Connector connects one nonmetallic 14/2 to 6/2 cable or two 14/2 to 12/3 NM-B cables inside or outside a box or enclosure without a locknut.
Four Screw Rectangular AC/MC Connector 1″, Malleable Iron
https://dev.nsiindustries.com/product/four-screw-rectangular-ac-mc-connector-1-malleable-iron/
Use Bridgeport four screw rectangular connectors to connect armored cable, metal clad cable and intermediate metal conduit to an electrical box or enclosure. The rectangular throat provides a positive end stop for the inserted cable jacket.
E-Z Lock® Insulated Snap-in AC/MC Connector 1/2″, Die Cast Zinc
https://dev.nsiindustries.com/product/e-z-lock-insulated-snap-in-ac-mc-connector-1-2-die-cast-zinc/
Use Bridgeport snap-in connectors to make fast, high-quality connections between AC/MC cable or flexible metal conduit and a box knockout. To install, just snap the connector into the knockout for a reliable connection – no tools required.
E-Z Lock® AC/MC Connector with .375″ Insulated Throat 3/8″, Steel
https://dev.nsiindustries.com/product/e-z-lock-ac-mc-connector-with-375-insulated-throat-3-8-steel/
Use Bridgeport AC/MC connectors to join AC/MC cable or flexible metal conduit to an electrical box or enclosure without requiring any tools. To install, simply squeeze the connector and insert it into the box knockout for an instant connection.
Single Screw Strap Type AC/MC Connector 3/4″, Insulated
https://dev.nsiindustries.com/product/single-screw-strap-type-ac-mc-connector-3-4-insulated/
Use Bridgeport single screw strap type connectors to connect AC/MC cable to an electrical box or enclosure. This model is also listed for use with MC-PCS and is CSA listed for ACG90.
Single Screw Strap Type AC/MC Connector 3/8″, Tri-Drive Screw
https://dev.nsiindustries.com/product/single-screw-strap-type-ac-mc-connector-3-8-tri-drive-screw/
Use Bridgeport single screw strap type connectors to connect AC/MC cable to an electrical box or enclosure. This model is also listed for use with MC-PCS, flexible metal conduit and is CSA listed for ACG90.
E-Z Lock® Duplex 90 Degree AC/MC Connector, 3/8″ Die Cast Zinc
https://dev.nsiindustries.com/product/e-z-lock-duplex-90-degree-ac-mc-connector-3-8-die-cast-zinc/
Use Bridgeport duplex 90 degree connectors to join AC/MC or FMC to an electrical box or enclosure at a 90 degree angle. Duplex design connects two lengths of conduit to a single knockout and the spring steel locking tabs snap the fitting into place.
E-Z Lock® Duplex AC/MC Connector 3/8″, Steel, .560″ Throat
https://dev.nsiindustries.com/product/e-z-lock-duplex-ac-mc-connector-3-8-steel-560-throat/
Use Bridgeport duplex AC/MC connectors to join two runs of flexible metal conduit or AC/MC cable to an electrical box or enclosure using a single knockout. The snap-in front end and single set screw design makes installation quick and easy.
Mighty-Seal® EMT to Duplex JMC/TECK Transition Coupling 3/4″
https://dev.nsiindustries.com/product/mighty-seal-emt-to-duplex-jmc-teck-transition-coupling-3-4/
Use Bridgeport transition couplings to transition between EMT and multiple JMC/TECK cables in wet locations. NPT tapered threads also permit installation in threaded boxes.